Building Wraps and Super Graphics

Ask us what we do that other installers usually do not, and the answer is large format. A building wrap is read from the street, from a car and sometimes from a highway, and at that distance a panel half an inch out of line becomes a visible step in the artwork. We install building wraps and super graphics: multi-story banners, wrapped garage faces, glass facades, full end walls inside big rooms and rooftop banner runs. Your printer produces the panels; we plan the access and put them up. Call us at 214-585-0050 about a building.

Denton Broncos wall graphic across the end wall of an indoor turf practice facility

Six Large-Format Jobs

GEICO across a parking garage

A blue GEICO super graphic, “What it feels like to get more with GEICO. Like giving a perfect high five. Every time.”, runs across the face of a parking garage directly over a road entrance. Our photo shows the boom lift and the cones still below it. A garage face is a long, flat run broken by openings, so the line of text has to stay level across every bay while traffic passes underneath.

GEICO super graphic reading like giving a perfect high five across a parking garage above a road entrance

A full end wall for the Denton Broncos

Inside an indoor turf practice facility, the whole end wall now reads “Denton Broncos, Denton, Texas” with the bronco D logo. Our install photos show the work going up from a scissor lift over the turf. Super graphics are not only an exterior product: a practice facility, an atrium or a warehouse wall can be just as large, and the planning is the same.

Denton Broncos wall graphic mid-install with a scissor lift and liner on the turf

Seventy-five years on an office tower

A multi-story “75 Years, the future of medicine” banner for UT Southwestern down the side of an office tower. A banner hung from the top of a building takes its position from the first panel placed, so that first panel has to be right.

A beverage wrap down a building side

Water bottles and a big-game logo covering a multi-story building side, installed with a lift at the base. Product imagery at that size has to stay continuous across every panel join, or the bottles look broken from the street.

Large interior wall graphics installed for a commercial client

A glass facade in player graphics

A full glass front covered with basketball player graphics, installed from a lift. Glass is seen from outside in daylight and from inside the building, and every seam sits where people look.

A rooftop banner run

A row of large rooftop banners at epic central, “all together epic”, with restaurant banners beside it. Rooftop work adds wind exposure and limited standing room to the usual height problem.

Is the building already booked for a date? Get a quote early, because the access plan is what sets the schedule on this kind of job. Call us at 214-585-0050.

Large-format super graphics installed on a commercial surface

What Counts as a Super Graphic

Super graphics are graphics at the size of the structure they sit on. On our jobs that means:

  • Building wraps and multi-story banners on exterior walls.
  • Glass facades covered edge to edge.
  • Parking garage faces over entrances and along levels.
  • Full interior walls in practice facilities, atriums and other big rooms.
  • Rooftop banner runs and other prominent architectural features.

Stadium and event facades have their own page, because event dates and venue rules shape that work. This page covers buildings that stay in use while the graphic goes up.

Interior super graphics wall installation detail

Getting Crews and Panels to Height

The print is the easy part of a building wrap. The hard part is getting a crew and large panels safely onto a surface several stories up, in the right order, without blocking the building’s entrances or the road in front of it. Every job above went up from a lift, a boom lift on the garage and the tower, a scissor lift inside the practice facility. We do not use cranes.

We plan the equipment and site access before the date is set: entry points, where the lift can stand and travel, space for tools and material, and how the public is kept clear of the work zone below. On the garage job, that meant cones and a lift working over a live road entrance.

Wallpaper installation service in progress on a commercial wall

Lift work also carries its own federal rules. On construction sites, OSHA’s aerial lift standard allows only authorized persons to operate an aerial lift and requires a body belt with a lanyard attached to the boom or basket; the general industry version requires trained operators and a fall arrest or travel restraint system attached the same way. Building managers and general contractors often ask about this before they let a lift onto their site, so it is part of the access conversation from the start.

Denton Broncos end wall graphic seen from midfield across the turf

The Surface Several Stories Up

A building is never perfectly square, and a facade can lose width between the ground floor and the roofline. We take width and height at several points and work from the smallest dimension, so the panels fit everywhere they have to. Then we look at the surface itself for cracks, damp spots and uneven areas. A wall that is cleaned and dry before the install is a wall the material can hold on to. Because we do not print, the measurements go straight to your printer, so the panel sizes come from the building rather than from a drawing of it.

Angled view of the Denton Broncos super graphic above the purple wall pads

Weather Decides the Install Date

Exterior graphics go up outside, and heat, cold, rain and high humidity all affect how material bonds. For outdoor work we check the conditions before we start and schedule the install for favorable weather, rather than forcing it on the day that was penciled in. On a building wrap, a day of patience costs far less than a panel that has to come back down. Wind is part of the same call when the work is high or on a roof.

Row of rooftop banners at night led by a red epic central all together epic banner

Working With Building Management

A building wrap goes up on a building that is still being used. We coordinate with the building or venue staff on access hours, restricted areas and installation windows, so tenants, visitors and deliveries keep moving while we work. When the only workable window is outside business hours, we work evenings, nights and weekends. Building rules and safety requirements become part of the plan, not something found out on the morning of the install. If the building on the day does not match the plan, the crew stops and we call whoever hired us before another panel goes up.

We are a 3M Certified Graphics Installation Company, certified since 2018, and building-scale work takes us nationwide from our base in Anna, Texas.

From Elevation Drawing to the Last Panel

A building wrap is planned from the access backward: once we know where the lift can stand and when, the rest of the schedule follows.

  1. Send the building

    Photos or elevation drawings, the artwork or concept, who is printing and the date you are working toward. We quote at no charge and usually answer within five hours.

  2. Survey the facade

    When the dimensions or the surface are uncertain, a survey settles them. Surveys are charged by scope.

  3. Plan the access

    The lift, where it stands, how the area below is kept clear, and the hours the building allows.

  4. Receive the panels

    The panels are shipped to our office ahead of the install.

  5. Install from the top line down

    Panel by panel, with the weather checked on the day.

  6. Take it down when its time is up

    Building wraps are often temporary, and taking them down is work we do too.

Worth Reading Before This Job

Frequently Asked Questions

A building wrap covers the side or face of a building. Super graphics is the wider term for any graphic at the scale of the structure, including glass facades, parking garages, rooftop banners and full interior walls.

From lifts. Our recent building jobs went up from boom lifts and scissor lifts, and we plan the equipment and access before the install date. We do not use cranes.

No. We installed a full end wall in an indoor turf practice facility from a scissor lift.

No, and nobody should. We check the conditions before exterior work and schedule the install for favorable weather, because heat, cold, rain and humidity all affect how the material bonds.

Usually not. We coordinate access hours and restricted areas with building management, and we can work evenings, nights and weekends so the building keeps operating around the install.

Talk Through Your Building Wrap

Send photos of the building, the artwork or concept, who is printing and the date you are working toward. To get started, call us at 214-585-0050 or email sales@graphicinstallationteam.com. Graphic Installation Team LLC, 488 Highview Ln #503A, Anna, TX 75409, Monday to Friday, 9:00 AM to 4:30 PM. Elevation drawings help us get a quote back faster.