When ten trucks park side by side, nobody looks at the artwork. They look at whether the logo sits at the same height on every door. Fleet graphics installation is mostly about that: one spec, applied the same way on the first unit and the last, without taking more vehicles off the road than the schedule allows. We install the fleet graphics your printer produces on vans, pickups, box trucks, trailers and service vehicles, and we take old graphics off when a unit is rebranded or leaves the fleet. We are an installation company, not a print shop. To plan a fleet, call us at 214-585-0050.
Full wraps in orange and black on the company’s vans and pickups: the “Since 1903” script logo, the horse-and-wagon emblem, and a ribbon carrying the website and phone number. Our photos of those units are dated across four separate days in August 2025, which is how a working fleet usually comes through: a few vehicles at a time, while the rest stay on the road. A Dallas Plumbing service pickup from an earlier job is in our gallery too.


White pickups with work caps, branded with blue and teal chevrons on the doors, lettering on the caps, unit numbers and license lines. A contractor fleet like this one is where the small text matters as much as the logo: the unit number and the license line have to sit in the same place on every truck, or the fleet stops reading as one.


Two red command trailers, a gooseneck and a bumper-pull, re-covered in plain red film and then finished as Verizon Frontline with a yellow stripe. Re-covering a trailer before the new branding goes on is fleet work in its purest form: the vehicle stays, the identity changes.

A high-roof Ford Transit for Barnaby Heating and Air, wrapped in a beach scene with palm trees, macaws and an AC unit. A white SUV for Christian Brothers Automotive with sweeping green and orange stripes and “Courtesy Shuttle” on the side. A full cargo van wrap for Zoomin Groomin, a mobile pet spa that works out of the vehicle all day.
Lining up a group of vehicles? Get a quote with the unit list attached, and we will flag the units where the art and the markings need a second look.

Fleet wraps run into a rule that single vehicle wraps rarely do. Under the federal marking rule, 49 CFR 390.21T, a commercial motor vehicle in interstate commerce has to show the carrier’s legal name or a single trade name and its USDOT number on both sides. The marking must contrast sharply with the background it sits on and be readable from 50 feet in daylight while the vehicle is stationary. Texas adds its own marking rule for some vehicle types, including vehicles with three or more axles and tow trucks.

A wrap changes the background those letters sit on. Lettering that read fine on white paint can vanish against a dark printed panel, or into a busy photo. That is why we ask about markings before the files go to print, and why we look for them on every unit before it leaves. Whether a vehicle is covered depends on its weight rating, its axles and how it is used, so confirm your own status with FMCSA or the Texas Department of Motor Vehicles. We install; we do not give legal advice.

Fleet graphics have a life cycle, and the install is only one part of it. A rebrand means the old graphics come off before the new ones go on, as they did on the command trailers. A vehicle that is sold, returned at the end of a lease or moved to another division usually has to leave without the company’s name on it. And a single damaged panel on one van has to be replaced without the repair standing out from the rest of the fleet.
We remove graphics as well as install them, so all three are the same crew’s work. When you book, tell us which units are new installs, which are rebrands and which are removals only, because removal time is part of the schedule.

Coverage is a cost decision more than a design one, and on a fleet the cost multiplies by the number of units. A full wrap covers the vehicle in the printed design, like the Dallas Plumbing vans. A partial wrap covers selected panels and lets the paint carry the rest. Decals and lettering handle logos, names, phone numbers, unit numbers and the required markings, like the cap lettering on the Climatec trucks. Plenty of fleets mix them, with full wraps on the most visible vehicles and lettering on the rest. We install all three, so the choice can follow your budget and your vehicles.

We are glad to sit in on that call. As an installation company we have no stake in your print order, only in making sure what arrives fits the trucks.

We are a 3M Certified Graphics Installation Company and have held that certification since 2018. For a printer or a sign company, the more useful fact is that we do not sell design or print, so handing us the install never puts your customer in front of a competitor. From our base in Anna, Texas, fleet programs reach wherever the vehicles operate.


A fleet rollout is the same install repeated many times, so the work is mostly in making the repeats identical.
Year, make, model and body style for each unit, and which ones come first. Different bodies mean different panel breaks, and your printer needs to know that before printing one design for all of them.
We clean, inspect and test the surfaces we are going to wrap, and we check that the printed material suits them. On a fleet that check matters twice, because a paint problem on one model usually turns up on every unit of that model.
Which vehicles come off the road, and when, built from your routes and shifts rather than a calendar we hand you. Evenings, nights and weekends are on the table when the vehicles are only free then.
Logo height, the position of the phone number, where the unit number and the marking sit: set on the first vehicle and measured off it on every vehicle after.
Every vehicle gets its own walk-around against the artwork proof, markings included. If a unit does not match the plan (a different body, damaged paint, a missing panel), we stop and call whoever hired us before that unit goes any further.
We install whatever lettering is in the printed set, including markings. Settle the wording and position in the artwork first, and confirm with FMCSA or the Texas Department of Motor Vehicles which vehicles must carry them.
We agree the schedule with your fleet manager before we start, so vehicles come off the road in an order your operation can live with, including evenings, nights and weekends when that suits.
Yes, with panel breaks drawn for each body style. That is why we ask for the unit list before printing.
We do. Removal is part of our fleet work, for rebrands and for vehicles that are sold or returned, so book it alongside the installs.
Yes. Fleet programs reach wherever the vehicles operate, and the spec set on unit one is the one every unit is checked against, wherever it is.
Send the unit list, the artwork and who is printing, and tell us how many vehicles you can spare at a time. To get started, call us at 214-585-0050 or email sales@graphicinstallationteam.com; a quote costs you nothing, and we aim to answer inside five hours. Graphic Installation Team LLC, 488 Highview Ln #503A, Anna, TX 75409, Monday to Friday, 9:00 AM to 4:30 PM. You can also get a quote by email with photos of a typical unit.
© Copyrighted 2026 Graphic Installation Team. All Rights Reserved. Powered By Fast Hippo Media