A motorcoach is about the hardest vehicle there is to wrap well. Its sides are forty-odd feet of flat panel that show every wave in the film, and its nose and rear are full of curves, seams, lights and hardware. We have installed full wraps on eight touring brand coaches, a college training trailer and a run of work trucks and vans, and we wrap cars, pickups, trailers and boats as well. We are an installation company: your printer or agency produces the wrap, and our crew puts it on the vehicle. Call us at 214-585-0050 to talk through yours.
Brand coaches travel to games, festivals and activations, and they are photographed everywhere they park. These are the ones on our record.

And one long trailer: a full wrap, side and rear, for Ranger College’s automotive training program, photographed at night under the lot lights.
Have a coach or a vehicle ready to wrap? Get a quote by emailing sales@graphicinstallationteam.com with the vehicle and the print details, or call us at 214-585-0050.

If the vehicle you have in mind is not on that list, call us before anything is printed. Several vehicles that need to match each other are a fleet program, and that has its own page.

A sedan wrap and a coach wrap are different jobs, and the difference is mostly in the parts nobody sees in the finished photo.
The sides. A coach side is long and flat, broken by baggage doors, an entry door and rows of windows. A wave, a stretch mark or a seam that drifts a quarter inch shows from across a parking lot, so the layout is fixed along the whole length before the first panel is committed.
The doors and the seams. Baggage doors and the entry door open and close all day. The artwork crosses every one of those gaps, so a face, a bottle or a word split across a door has to meet itself again when the door is shut.
The nose and the rear. This is where the curves, lights, mirrors, badges and hardware are, and where film has to be worked into recesses rather than stretched over them.

Two sides, two layouts. Brand coaches often carry different messages on each side, like the Kansas City coach. Both layouts have to turn the corner onto the nose and the rear and still line up there.
That is why we look at the vehicle and the print files together before install day, so the panel breaks your printer chose work with the body the film is going on.


Wrap films come with their own installation instructions, and they are more specific than most buyers expect. Two of them make the point.

On the print side, the same maker recommends at least 24 hours of drying from the time of printing before a print is laminated, because laminating too early can cause the wrap to fail. That one belongs to your printer, but it is worth knowing when a wrap is promised for the day after it prints.





Brand coaches change campaigns, and company vehicles change hands. Removal is one of our services, so the same crew can take an old wrap off and put the next one on. Tell us when you book if the vehicle is already wrapped, because removal time is part of the schedule and the condition of the paint underneath is part of the plan.
We are a 3M Certified Graphics Installation Company, a certification the company has held since 2018, and vehicle work takes our crews from Anna, Texas, to the vehicle wherever in the country it is parked.

On install day the order of work never changes, whether the vehicle is a pickup or a full-size coach.
Every vehicle is cleaned, inspected and tested before any film goes on it. Wax, road film or old adhesive under new vinyl is how edges start lifting and bubbles appear, and we check that the material your printer used suits the surface.
We position the graphic on the body before it is applied, so the design lines up across the gaps between doors and panels instead of drifting a little more with every section.
Most of the time on a wrap goes into the panel joins, the edges around handles and trim, and the recesses where film has to be worked in rather than stretched over.
We look the vehicle over panel by panel with the artwork proof in hand. If something does not match the proof or the vehicle, we stop and call whoever hired us before going further.
Cars, pickups, cargo and service vans, trucks, trailers and boats, as well as full motorcoaches. We have installed full wraps on eight brand coaches.
Yes. We install full wraps, partial wraps, and decals and lettering, so the coverage can match the vehicle and the budget.
Warmer than most people expect. One film maker treats 50°F as the absolute minimum for the film, the air and the vehicle and recommends 70 to 80°F; another wants 65 to 75°F. We work to the instructions for the film your printer used.
It can on paint that was repainted outside the factory system, chipped or rusted, which one film maker flags as a removal risk. Factory paint in good condition is the safest base, so point out any repaired panels before the wrap is printed.
On some of them. Texas law leaves the side windows behind the driver open to film, and the rear window when the vehicle has an outside mirror on each side showing at least 200 feet behind. Keep the windshield and the windows beside the driver clear unless your printer has checked the light rules.
Fleet programs are about keeping many units identical on a schedule, so we plan them as their own service. A single vehicle or a handful of mixed vehicles fits here.
Send us the vehicle details and tell us who is printing. We will look at the files and the vehicle together and tell you what the install involves. The quote is free, and the reply usually lands within five hours. To get started, call us at 214-585-0050, email sales@graphicinstallationteam.com, or reach us at Graphic Installation Team LLC, 488 Highview Ln #503A, Anna, TX 75409. Office hours are Monday to Friday, 9:00 AM to 4:30 PM.
© Copyrighted 2026 Graphic Installation Team. All Rights Reserved. Powered By Fast Hippo Media