Floor, Elevator and Specialty Surface Graphics

Some of the hardest-working graphics in a building sit on surfaces nobody thinks of as a canvas: the floor people walk across, the stairs they climb, the elevator they stand in, the column in the middle of the lobby, the counter they lean on. We install floor graphics, stair and elevator graphics, column, locker and counter wraps, and architectural film that refinishes doors, walls and counters. Each of these surfaces is touched, walked on or cleaned in a way a wall never is, so each one is planned on its own terms. We are an installation company: your printer produces the material, and we install it. To ask about a surface, call us at 214-585-0050.

Elevator wall with a QR code panel
Surfaces
Floors, stairs, elevators, columns, counters
Floor laminate
Slip-rated, such as UL 410
Refinishing
Architectural film on doors and counters
Fixtures
Wrapped before they ship, when possible

Surfaces We Have Covered

A whole fan venue, floor to ceiling fans. In Hook ’Em House, the Texas Longhorns fan venue, we installed a court-style floor graphic, stair graphics and elevator graphics, alongside wrapped lockers and wrapped ceiling fan blades, all in one burnt-orange fit-out.

An elevator interior. A full elevator wall panel with a QR code and the line “your adventure starts here,” installed where riders face it for the whole trip.

Counters before they reached the floor. Lemon-print wraps on counters, and rounded counters for AT&T wrapped in AT&T blue, both done in a warehouse with the pieces on pallets before they shipped.

Floors under a display. Crates of footballs in a jewelry store’s game-day fit-out sat on floor graphics printed to match them.

A rolling cart. A cart wrapped in a white topographic pattern with a green “Connect at Northwest” roundel, for a building lobby.

Columns on an expo floor. Column wraps that turned the structural columns of an expo hall into display surfaces.

Planning a floor, an elevator or a set of fixtures? Get a quote with a photo of the surface and the area to cover.

TEXAS letters and longhorn wall graphic behind standing tables

Floors Are Walked On

A floor graphic is the only graphic people stand on, drag carts across and clean with a mop, so the material matters more here than anywhere else. Floor graphics need an overlaminate made for floors, and makers rate those laminates for slip resistance: one film maker’s floor laminates, for example, are stated to meet UL 410, the standard for slip resistance of floor surface materials. Ask your printer which laminate they are using and what it is rated to before the job prints.

Retail display graphics installed in a store interior

The floor itself counts as much as the film. Before a floor install we look at what the floor is, how smooth it is, and whether it is clean, dry and sound enough to bond to. Federal workplace rules expect walking surfaces to be kept free of hazards such as loose boards, leaks and spills, and a floor graphic with a lifted edge is exactly the kind of thing that turns into one. That is why edges get the most attention on a floor job, and why a floor graphic that is starting to lift should come up rather than stay down.

How long it needs to last decides the rest. A floor graphic for a weekend event and one for a year in a lobby are different products, so tell your printer which one you need.

TEXAS longhorn wall graphic in a fan venue, wide view

Stairs and Elevators

Stair graphics are read from below, one riser at a time, so the artwork has to be split across the risers and line up when you look up the whole flight. The treads are walked on and the risers are kicked, which puts them closer to a floor job than a wall job.

Elevators have problems of their own: a tight space to work in, doors that open and close, panels people lean on and touch all day, and a car that is out of service while we work. Both are short, detailed installs where planning the panel breaks with your printer up front saves the most time on site, and where working evenings, nights or weekends keeps the building moving.

Neon Texas outline over a tower graphic on a venue wall

Counters, Fixtures and Carts

Counters and fixtures can often be wrapped before they go into the space, which keeps the install off a busy floor and lets the fixture arrive finished. The lemon-print and AT&T counters both went out that way, on pallets from a warehouse. Pieces like these are seen from more than one side and handled every day, so seams close at corners and edges rather than disappearing into a wall, and the edges that hands and carts hit are finished to stay down.

Completed retail graphics installation

Columns

A column is round or boxed, seen from every direction and usually in the middle of foot traffic. Wrapping one means planning where the seam falls, so it faces the least-seen side, and making sure the graphic reads as one image all the way around. Columns are common on expo floors and in lobbies, and they are often the most visible structural surface in a room.

Ceiling fan blades wrapped with Hook 'Em House graphicsBurnt orange ceiling fan blade wraps lit from below

Architectural Film

Not every specialty job is a printed graphic. Architectural film refinishes a surface instead of decorating it: a wood grain, stone, metal or solid color film over doors, walls, counters and elevator panels, so the surface looks new without being replaced. We install architectural film along with graphics, so a lobby can get a refinished elevator surround and a branded wall from the same crew. Send us the film your supplier has specified and photos of the surfaces, and we will say how that film install would go.

Longhorn logo over orange and white stripe wall graphics

Is Your Surface a Candidate?

Before anything is printed for an unusual surface, we want to know four things:

  1. What it is made of, and whether it is smooth, textured, painted, sealed or bare.
  2. How it is used, including foot traffic, touching, cleaning and whether it moves, like a door or an elevator panel.
  3. How long the graphic needs to stay, for one event or for years.
  4. Who is printing, so the material and the laminate can be matched to the surface before production.

If any of those is uncertain, a site survey settles it. Schedule a call at 214-585-0050 and we will tell you whether the surface is a good candidate. Quoting is free, and you will usually hear back within five hours.

We are a 3M Certified Graphics Installation Company, certified since 2018, based in Anna, Texas, and we install on specialty surfaces nationwide.

Striped hallway wall graphics being installed, ladders in place

Worth Reading Before This Job

Frequently Asked Questions

A court-style floor graphic in the Texas Longhorns fan venue, and floor graphics printed to match a store’s game-day display. We check the floor and the material before every floor install.

A laminate made for floors and rated for slip resistance, such as laminates stated to meet UL 410, plus a clean, sound floor and edges that stay down. Ask your printer what their laminate is rated to.

A tight space, doors that open and close, panels people touch all day and a car out of service while we work. We have installed elevator graphics, including a full wall panel with a QR code, and evening or weekend work keeps the building moving.

No. Architectural film refinishes a surface, such as a door, a wall or a counter, instead of decorating it. We install both.

Often, yes. We have wrapped counters in a warehouse before they shipped, which keeps the work off a busy floor.

Possibly. Tell us what the surface is made of and how it is used, and we will tell you whether it is a candidate.

Tell Us What Surface You Have

Send a photo of the surface, what you want on it and who is printing. To get started, call us at 214-585-0050 or email sales@graphicinstallationteam.com. Graphic Installation Team LLC, 488 Highview Ln #503A, Anna, TX 75409, Monday to Friday, 9:00 AM to 4:30 PM. A single photo is enough to get a quote started, and we can schedule a site survey if the surface needs a closer look.